TERPENE USAGE GUIDE

Our botanical aromatic compounds are 100% pure and should always be handled with care. These highly concentrated substances must be diluted before consumption, except when used for cold vaporization tastings, where only a minimal amount of pure product should be applied.

To achieve the desired intensity of flavor and aroma, we recommend starting with a small quantity and gradually increasing as needed. Due to their potency, even a small amount can provide a strong and noticeable effect.

For reference, 1ml of our product contains approximately 40 drops using our pipette, with each drop measuring 0.025ml.

USAGE IN E-LIQUID BASES

To properly infuse e-liquid bases with aroma and flavor, the recommended concentration ranges from 1% to 3%, with an absolute maximum of 4%. The most commonly used proportion is 2%.

Example Calculations:

For 10ml of e-liquid base at 2% concentration, add 0.2ml (approximately 8 drops).

For 100ml of e-liquid base at 2% concentration, add 2ml (approximately 80 drops).

USAGE IN CANNABIS OR HEMP EXTRACTS AND CONCENTRATES

This product can be used to enhance the aroma and flavor of cannabis-derived extractions, including dry hash, traditional hash, BHO, wax, shatter, rosin, and distillates. The recommended concentration ranges from 1% to 4%.

Example Calculation:

For 10g of cannabis concentrate, a 3% concentration would require approximately 0.3ml of product.

Application Tips:

Always start with a minimal amount, such as 1 drop per 3g or 1 drop per 2g, to determine the optimal ratio.

Ensure thorough and even mixing for the best results.

After application, store the product in a vacuum-sealed environment and allow 24 to 48 hours for complete integration.

USAGE IN CANNABIS OR HEMP FLOWERS

For effective aromatic infusion, an electric aroma diffuser is the preferred method. Ideally, use a diffuser designed for pure aromatic compounds. If water must be added, mix at a ratio of 20% product to 80% water, shaking well before use.

Recommended Dosage:

For every 1kg of dried flowers, use 5ml to 10ml of product.

Application Process:

Place the flowers in a vertical dryer within a closed environment (such as a grow box).

If available, use an extraction system to recirculate any airborne compounds.

Once the diffuser is empty, check the humidity of the flowers. If necessary, allow them to dry further.

For best results, store the flowers in a vacuum-sealed or airtight container to ensure full absorption and long-lasting aroma.

USAGE IN FOOD AND BEVERAGE PRODUCTS

For food and beverage applications, we offer food-grade and water-soluble versions of our product. The required concentration is significantly lower than that used for e-liquids or cannabis products.

The specific amount depends on the base ingredient and the stage of application. For best results, apply during cold processing and avoid sudden pressure changes to preserve the integrity of the aromatic compounds. Additionally, ensure that cooking temperatures do not exceed 60°C, as excessive heat can cause evaporation.

Example Dosages:

1kg of ice cream → 0.025ml to 0.1ml

3L of beer → 1ml

1L of sparkling water → 1-2 drops

3L of oil → 1ml

1kg of honey → 0.5ml to 1ml

STORAGE RECOMMENDATIONS

To preserve the quality and potency of our product, we have designed specialized packaging to prevent evaporation and contamination. Each vial includes:

A safety stopper

An anti-leakage disk

A secure screw cap

Storage Tips:

Always reseal the container immediately after use to prevent evaporation.

Store in a cool environment, preferably in the refrigerator, to maintain stability.

Keep the product in its original dark glass packaging, which provides UV protection and is ideal for preserving these sensitive aromatic compounds.

Avoid storing in plastic or silicone containers, as the product is corrosive and may degrade these materials.